R4795A1016-REB

(0)No Reviews yet
$226.64
SKU: R4795A1016-REB
Honeywell R4795A 1016 repair services by Acme Controls (Also available as Acme Advance Replacement Services-see REB Terms and Conditions tab, below)

This item is IN STOCK

Current Stock: 29

Honeywell R4795A1016 Primary Control - Repaired by Acme Controls

Primary control provides solid state electronic flame safeguard protection for commercial and industrial gas or oil burners.

Features
*Electronic rectification or ultraviolet flame detection, with appropriate color-coded plug-in amplifier.
*Variable prepurge timing, with use of preferred plug-in purge timer card.
*Recycles through prepurge if flame signal is lost while in run. Failure to establish pilot results in a lockout.
*Safe-start check prevents start-up if flame failure occurs.
*Includes built-in protection against ignition crossover in flame rod systems.
*Includes SPDT alarm contacts.
*Solid state circuitry.
*Mounts and removes easily through use of captive mounting screws.
*Mounting base is made of strong thermoplastic.

Acme recommends purchasing the entire package, including a flame amplifier and timer. It will save you time and aggravation in the long run!


Specifications
Weight (lbs)3
Voltage120
Frequency50/60 Hz
Ambient Temperature-20 to +125°F | -29 to +52°C
Electrical ConnectionsMounting Screws
Shipping Weight4
MountingQ270A1024 Subbase

Don't forget your Flame Amplifier!!

Flame ResponseRectificationUltra Violet
2-4 secondsR7289A1004R7290A1001
0.8 secondsR7289A1012R7290A1019
2-4 seconds (-40°C)R7289A1020R7290A1027

And don't forget your Prepurge Timer!!

ST71A10007 seconds
ST71A104210 seconds
ST71A101830 seconds
ST71A102660 seconds
ST71A103490 seconds


Tech Sheet

Advance Replacement Services

This item, ending with -REB, is a repair service. In purchasing this service, you are agreeing to send us your non-functional, but repairable, control. It must not be burned, cannot have any water damage, and cannot be physically broken.

To simplify the return shipping process, a UPS Return Service (RS) Label will be added to your order and the cost of that return service will be included as a separate line item. You will receive a Return Merchandise Authorization (RMA) form and this UPS label in the carton along with the item(s) you have purchased.

Within 10 days of receiving your Rebuilt/Repair part, you must send your repairable control and RMA form back to Acme using the included UPS label. Failure to return a repairable core could result in additional charges of $200-$5000.

Cores returned after more than 10 days could result in late return fees of 10-100% of core charges.

Ratings & Reviews

No reviews available

Be the first to Write a Review